MeiTrack MT90 Specifiche

MT90 Applications & Manual Guide Version 1.0

8 In the SMS, the values after “lat” is the latitude, the values after “lng” is the longitude. *Meitrack Manager and SMS command. The default passw

9 Note: the default value is empty, if the function numbers are less than three while setting, it must be added “,” to avoid setting failure. To clea

10 Note: this value is your MT90’s IMEI number. The device will send this data automatically and these numbers don’t represent anything significant t

11 Run “Meitrack Manager.exe”, it will detect Comm port and read all MT90’s parameters automatically:

12 5.1. SMS Tracking Items Descriptions SMS Password The defaulted value 0000 of SMS password for sending SMS commands SMS Time Zone  Default

13 Reboot Report when MT90 reboots. SMS header defaulted as “Reboot”. Geo-fence Alarm Geo-fence is circle with preset radius. Max 8 geo-fence waypoin

14 Note: main IP:210.193.55.36, main port: 8500. Backup IP/Domain and Port Input backup server’s IP address and port number to avoid losing data whe

15 6. Using SMS Command NOTE: **** is user’s password and the default password is 0000. The tracker will only accept SMS commands from a user with

16 Description SMS Command Example Initialization ****,F11 0000,F11 Function: To reset all the setting (except for the password) back to factory defa

17 Description SMS Command Example Add New SMS Event to Authorize Phone Number ****,B02,P,E 0000,B02,1,17 Function: To add new SMS event report to an

Table of Contents PRODUCT OVERVIEW ... 1 1. PRODUCT FEATUR

18 Delete Geo-fence Alert ****,B06,X 0000,B06,1 Function: To delete a set of Geo fence alert. SMS Response: TrackerID,B06,OK X = 1 to 8 Waypoint.

19 Function: Tracker default time zone is GMT. You may use this command to correct the time that for SMS reporting. SMS Response: TrackerID,B35,OK X

20 7. Tracking 7.1. Track by SMS Description SMS Command Example Track on Demand - Summarised ****,A00 0000,A00 Function: Tracker sends SMS locat

21 Google Earth: Google Maps:

22 8. Event Codes Table Event Code Event Default SMS Header (max 16 bytes) Default GPRS Flag Default SMS Flag Default Picture Flag 1 SOS/In

23 66 Press Input 2 to Call / N/A N N/A Event Code Event Default SMS Header (max 16 bytes) Default GPRS Flag Default SMS Flag Default Pic

24 Problem: Green LED is Flashing (1 second ON and 2 seconds OFF) Possible Cause: Resolution No GSM Signal. Check with a mobile phone to see if there

25 11. APNs Local Telecom APN - Prepaid APN - Postpaid Singtel hicard internet Starhub shppd shwap MobileOne miworldmcard sunsurf NOTE: APNs are

1 Product Overview MT90 is a GPS/GSM/GPRS tracking device specially developed and for pets, children, personal safety and even vehicles. With sup

2 1.2. Specifications Items Specification Dimension 77 x 47 x 20mm Weight 65g Charging Voltage Mini USB charging interface, DC4.2V~5.5V/400mA Back

3 2.3. Hardware Precautions / Maintenance  Do not disassemble, tamper or attempt to repair the tracker, components or accessories. Doing so voids

4 3.1. View and Buttons No. Item Description 1 GPS LED (Blue) Indicating GPS and battery status, please refer to below LED indications. 2 GSM LED (

5 3.2. LED Indications Long press the switch for 2 seconds to turn on/off MT90. GPS LED (Blue) On Charging Flashing (every 5 secs.) Sleepi

6 2. Insert the SIM Card Place the SIM card into the device with the gold-colored side facing down. Note: make sure there is enough credit on the S

7 6. Charge with the Travel Adapter Open the cover of the multifunction jack of the device. Plug the small end of the adapter into the multifunctio